Verkaufe NEUES Specialized Status 1 2014 zum Superpreis!!!! - Druckversion +- Downhill-Board (https://downhill-board.com) +-- Forum: Downhill Rangers (https://downhill-board.com/forumdisplay.php?fid=5) +--- Forum: Marktplatz (https://downhill-board.com/forumdisplay.php?fid=33) +---- Forum: Komplettbikes und Rahmen (https://downhill-board.com/forumdisplay.php?fid=31) +---- Thema: Verkaufe NEUES Specialized Status 1 2014 zum Superpreis!!!! (/showthread.php?tid=68308)

Verkaufe NEUES Specialized Status 1 2014 zum Superpreis!!!! - lukas p. - 2013-11-18 Hi Verkaufe mein neues Specialized Status 1 2014 zum absoluten Schnäppchenpreis von 1800€. Da das Bike leider ein Notverkauf ist. Das Bike ist wie schon gesagt neu und hat keinerlei Gebrauchsspuren. Rahmen aus M4 Aluminium mit 200mm Federweg am vollaktiven FSR-Hinterbau mit gedichteten Lagern, 1.5" Steuerrohr, ISCG-Aufnahme; leicht beherrschbare Geometrie, top Handling und leistungsfähiges Fahrwerk machen das Status zu einem DH-Bike für Rookies und Cracks gleichermaßen Custom X-Fusion Vector R Stahlfeder-Öl-Dämpfer sorgt am FSR-Hinterbau für hohe Laufruhe und satte Bodenhaftung; leicht einstellbare Zugstufe X-Fusion Vengeance Stahlfeder-Öl-Gabel mit 170mm Federweg verleiht der Front hohe Kontrollierbarkeit auf technischen Strecken; einstellbare Zugstufe; 20mm Steckachse für exakte Fahrmanöver 32mm breite P.Disc Felgen sorgen mit ebenso soliden Specialized Hi Lo Disc Naben mit 36 Loch für steife, robuste Laufräder Traktionsstarke Butcher SX 2.3" Reifen mit solidem Aufbau und niedrigem Rollwiderstand Hoch belastbarer, 780mm breiter Specialized DH Lenker verschafft souveräne Kontrolle über Bike und Gelände [TABLE] [TR] [TD="class: table, width: 200"]RAHMEN[/TD] [TD="class: table, width: 430"]M4 hydroformed tubing, 1.5" forged headtube, ISCG mounts, 135mm rear spacing, full-cartridge bearing pivots, 200mm travel[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: table, width: 200"]SWAT[/TD] [TD="class: table, width: 430"] [/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: table, width: 200"]DÄMPFER[/TD] [TD="class: table, width: 430"]Custom X-Fusion Vector R, coil over w/ piggy back, adj. rebound, 8.5x2.5", spring rate XS: 350, S: 400, M: 450, L: 500[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: table, width: 200"]GABEL[/TD] [TD="class: table, width: 430"]X-Fusion Vengeance R, coil spring, tapered alloy steerer, reb adj., 20mm thru-axle, 170mm travel[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: table, width: 200"]STEUERSATZ[/TD] [TD="class: table, width: 430"]Semi-integrated alloy cups for 1-1/2" headtube and 1-1/8" steerer, cartridge bearings[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: table, width: 200"]VORBAU[/TD] [TD="class: table, width: 430"]Specialized P.Series MTB, forged alloy, 4-bolt, 40mm length, 31.8mm clamp[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: table, width: 200"]LENKER[/TD] [TD="class: table, width: 430"]Specialized DH, low-rise, 6061 alloy, 780mm wide, 9-degree backsweep, 6-degree upsweep, 31.8mm[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: table, width: 200"]LENKERGRIFFE[/TD] [TD="class: table, width: 430"]Specialized Sip Grip, light lock-on, half-waffle aramid-infused, S/M: regular, Others: XL thickness[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: table, width: 200"]VORDERRADBREMSE[/TD] [TD="class: table, width: 430"]Avid Elixir 1, metallic pad, 200mm rotor[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: table, width: 200"]HINTERRADBREMSE[/TD] [TD="class: table, width: 430"]Avid Elixir 1, metallic pad, 180mm rotor[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: table, width: 200"]BREMSHEBEL[/TD] [TD="class: table, width: 430"]Avid Elixir 1 R, hydraulic disc, tool-less reach adj.[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: table, width: 200"]UMWERFER[/TD] [TD="class: table, width: 430"] [/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: table, width: 200"]SCHALTWERK[/TD] [TD="class: table, width: 430"]SRAM X7, 9-speed, short cage[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: table, width: 200"]SCHALTHEBEL[/TD] [TD="class: table, width: 430"]SRAM X4, 8-speed, trigger[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: table, width: 200"]KASSETTE[/TD] [TD="class: table, width: 430"]SRAM PG-830, 8-speed, 11-32[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: table, width: 200"]KETTE[/TD] [TD="class: table, width: 430"]KMC X-8, 8-speed, reusable Missing Link[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: table, width: 200"]KURBELGARNITUR[/TD] [TD="class: table, width: 430"]Truvativ Ruktion, 165mm, w/ Status guide[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: table, width: 200"]KETTENBLÄTTER[/TD] [TD="class: table, width: 430"]34T steel, 4-bolt, compact 104mm pattern[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: table, width: 200"]INNENLAGER[/TD] [TD="class: table, width: 430"]Truvativ Howitzer XR, oversize sealed outboard cartridge bearings, 73mm shell[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: table, width: 200"]PEDALE[/TD] [TD="class: table, width: 430"]Alloy platform, 9/16"[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: table, width: 200"]FELGEN[/TD] [TD="class: table, width: 430"]P.Disc, 32mm wide, 36h[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: table, width: 200"]VORDERRADNABE[/TD] [TD="class: table, width: 430"]Specialized Hi Lo disc, sealed cartridge bearings, 20mm thru-axle, 32h[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: table, width: 200"]HINTERRADNABE[/TD] [TD="class: table, width: 430"]Specialized disc, bolt-on 135mm, 36h[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: table, width: 200"]SPEICHEN[/TD] [TD="class: table, width: 430"]Stainless, 14g[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: table, width: 200"]VORDERREIFEN[/TD] [TD="class: table, width: 430"]Specialized Butcher SX, 2Bliss Ready, 26x2.3", foldable aramid bead, dual compound, 60TPI[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: table, width: 200"]HINTERREIFEN[/TD] [TD="class: table, width: 430"]Specialized Butcher SX, 2Bliss Ready, 26x2.3", aramid bead, dual compound, 60 TPI[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: table, width: 200"]SCHLÄUCHE[/TD] [TD="class: table, width: 430"]Standard Schrader valve[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: table, width: 200"]SATTEL[/TD] [TD="class: table, width: 430"]Specialized DH, 8mm steel rails[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: table, width: 200"]SATTELSTÜTZE[/TD] [TD="class: table, width: 430"]Specialized 6061 alloy, 2-bolt micro-adjust, no offset, 30.9mm, 300mm[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: table, width: 200"]SATTELSTÜTZKLEMME[/TD] [TD="class: table, width: 430"]Specialized 7050 hard anodized alloy, w/ QR, 34.9mm, black[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: table, width: 200"][/TD] [/TR] [/TABLE] mfg Lukas