2015-09-08, 19:16
Biete hier mein 160 mm Enduro an, es wurde immer gepflegt und gewartet deswegen auch der gute Zustand. Bike wird frisch entlüftet mit neuen Bremsbelägen verkauft.
Hier die Originalteile:
RAHMEN
M5 alloy, fully manipulated frame w/ ORE TT/ DT, tapered and forged HT, ISCG mount, sealed cartridge bearing pivots, replaceable derailleur hanger, 160mm travel
DÄMPFER
Custom Fox RP2, ProPedal and rebound adj., 8.5 x 2.125", Enduro extension
GABEL
RockShox Lyrik R, Solo Air, tapered alloy steerer, adjustable rebound, 20mm thru-axle w/ Maxle SL, 160 mm travel
STEUERSATZ
1-1/8 and 1.5" Threadless, Campy style upper with 1.5" lower, cartridge bearings
VORBAU
Specialized XC, 3D forged alloy, 4-bolt, 31.8mm clamp, adjustable rise
LENKER
Specialized Enduro low-rise bar, 7050 alloy, 720mm wide, 8 degree backsweep, 6 degree up, 31.8mm
LENKERGRIFFE
Specialized lock-on, S/M: Grappler, Other: Rocca
VORDERRADBREMSE
Custom Avid Elixir R SL, hydraulic disc, alloy backed semi-metallic pads, stainless hardware, G3 Clean Sweep rotor, 203mm rotor
HINTERRADBREMSE
Custom Avid Elixir R SL, hydraulic disc, alloy backed semi-metallic pads, stainless hardware, G3 Clean Sweep rotor, 185mm rotor
BREMSHEBEL
Custom Avid Elixir R SL hydraulic, tool-less reach adj.
UMWERFER
Shimano FD-M660-E SLX, double specific E-type for DMD, top swing, bottom pull
SCHALTWERK
SRAM X.9, 9-speed, mid cage
SCHALTHEBEL
SRAM X.7, 9-speed, aluminum trigger
KASSETTE
Shimano HG61, 9-speed, 11-34t
KETTE
SRAM PC-971, 9-speed w/Power Link
KURBELGARNITUR
Custom SRAM S-1250, GXP spindle, 9-speed AM double, removeable spider, with shift guide, S: 170mm, others: 175mm
KETTENBLÄTTER
36A x 24A, 4-bolt, 104/64mm
INNENLAGER
SRAM GXP, outboard bearing
PEDALE
Resin Test Ride Pedals with toe clips, CEN std.
FELGEN
Custom DT Swiss E440S, sleeved w/eyelets, 26mm, 32h
VORDERRADNABE
Specialized Hi Lo disc, laser-etched logo, sealed cartridge bearing, 20mm thru-axle, 32h
HINTERRADNABE
Specialized Hi Lo disc, laser-etched logo, double sealed cartridge bearing, QR, 32h
SPEICHEN
DT Swiss Champion 1.8mm (15g) stainless
VORDERREIFEN
Specialized Clutch Control, 60 TPI, 2Bliss ready aramid bead, dual compound, 26x2.3"
HINTERREIFEN
Purgatory Control, 60 TPI, 2Bliss ready aramid bead, dual compound, 26x2.2"
SCHLÄUCHE
Ultralight presta valve
SATTEL
Specialized BG Henge Comp, hollow Cr-Mo rails, 143mm width
SATTELSTÜTZE
2014 butted alloy, single bolt setback, 30.9mm, S/M: 350mm, others: 400mm
SATTELSTÜTZKLEMME
34.9mm clamp ID, 7050 hard annodized alloy collar w/ QR, black
Zusätzlich wurde eine Rock Shox Reverb Sattelstütze verbaut und wird mit leichtbau Pedalen von KCNC oder Mallet 2 verkauft.
Neupreis liegt bei 2700€
Verkaufspreis: 1650 VHB
Bei Interesse bitte Mail an Mr.schoengruber@yahoo.de
![[Bild: attachment.php?attachmentid=65170&stc=1]](https://www.downhill-board.com/attachment.php?attachmentid=65170&stc=1)
![[Bild: attachment.php?attachmentid=65171&stc=1]](https://www.downhill-board.com/attachment.php?attachmentid=65171&stc=1)
![[Bild: attachment.php?attachmentid=65172&stc=1]](https://www.downhill-board.com/attachment.php?attachmentid=65172&stc=1)
Hier die Originalteile:
RAHMEN
M5 alloy, fully manipulated frame w/ ORE TT/ DT, tapered and forged HT, ISCG mount, sealed cartridge bearing pivots, replaceable derailleur hanger, 160mm travel
DÄMPFER
Custom Fox RP2, ProPedal and rebound adj., 8.5 x 2.125", Enduro extension
GABEL
RockShox Lyrik R, Solo Air, tapered alloy steerer, adjustable rebound, 20mm thru-axle w/ Maxle SL, 160 mm travel
STEUERSATZ
1-1/8 and 1.5" Threadless, Campy style upper with 1.5" lower, cartridge bearings
VORBAU
Specialized XC, 3D forged alloy, 4-bolt, 31.8mm clamp, adjustable rise
LENKER
Specialized Enduro low-rise bar, 7050 alloy, 720mm wide, 8 degree backsweep, 6 degree up, 31.8mm
LENKERGRIFFE
Specialized lock-on, S/M: Grappler, Other: Rocca
VORDERRADBREMSE
Custom Avid Elixir R SL, hydraulic disc, alloy backed semi-metallic pads, stainless hardware, G3 Clean Sweep rotor, 203mm rotor
HINTERRADBREMSE
Custom Avid Elixir R SL, hydraulic disc, alloy backed semi-metallic pads, stainless hardware, G3 Clean Sweep rotor, 185mm rotor
BREMSHEBEL
Custom Avid Elixir R SL hydraulic, tool-less reach adj.
UMWERFER
Shimano FD-M660-E SLX, double specific E-type for DMD, top swing, bottom pull
SCHALTWERK
SRAM X.9, 9-speed, mid cage
SCHALTHEBEL
SRAM X.7, 9-speed, aluminum trigger
KASSETTE
Shimano HG61, 9-speed, 11-34t
KETTE
SRAM PC-971, 9-speed w/Power Link
KURBELGARNITUR
Custom SRAM S-1250, GXP spindle, 9-speed AM double, removeable spider, with shift guide, S: 170mm, others: 175mm
KETTENBLÄTTER
36A x 24A, 4-bolt, 104/64mm
INNENLAGER
SRAM GXP, outboard bearing
PEDALE
Resin Test Ride Pedals with toe clips, CEN std.
FELGEN
Custom DT Swiss E440S, sleeved w/eyelets, 26mm, 32h
VORDERRADNABE
Specialized Hi Lo disc, laser-etched logo, sealed cartridge bearing, 20mm thru-axle, 32h
HINTERRADNABE
Specialized Hi Lo disc, laser-etched logo, double sealed cartridge bearing, QR, 32h
SPEICHEN
DT Swiss Champion 1.8mm (15g) stainless
VORDERREIFEN
Specialized Clutch Control, 60 TPI, 2Bliss ready aramid bead, dual compound, 26x2.3"
HINTERREIFEN
Purgatory Control, 60 TPI, 2Bliss ready aramid bead, dual compound, 26x2.2"
SCHLÄUCHE
Ultralight presta valve
SATTEL
Specialized BG Henge Comp, hollow Cr-Mo rails, 143mm width
SATTELSTÜTZE
2014 butted alloy, single bolt setback, 30.9mm, S/M: 350mm, others: 400mm
SATTELSTÜTZKLEMME
34.9mm clamp ID, 7050 hard annodized alloy collar w/ QR, black
Zusätzlich wurde eine Rock Shox Reverb Sattelstütze verbaut und wird mit leichtbau Pedalen von KCNC oder Mallet 2 verkauft.
Neupreis liegt bei 2700€
Verkaufspreis: 1650 VHB
Bei Interesse bitte Mail an Mr.schoengruber@yahoo.de
:bicycle: