2005-07-28, 17:12
Du brauchst folgende Werkzeuge:
TL-FC32: Crank Adaptor Installation Tool for all Hollowtech
2 bottom bracket cups. Code No.Y-130 09210
= für die Lagerschalen
TL-FC16: Crank Installation Tool for Hollowtech 2 tension
caps. Code No. Y-130 09220
= für das Aufziehen der linken Krurbel auf die
Achse
und einen Imbus um die linke Kurbel festzuschrauben:
Schau dir einfach mal das Tech-Manual von Shimano an:
http://cycle.shimano-eu.com/media/cyclin...566205.pdf
da wirst alles finden was du brauchst.
Grüße CHRISP
TL-FC32: Crank Adaptor Installation Tool for all Hollowtech
2 bottom bracket cups. Code No.Y-130 09210
= für die Lagerschalen
TL-FC16: Crank Installation Tool for Hollowtech 2 tension
caps. Code No. Y-130 09220
= für das Aufziehen der linken Krurbel auf die
Achse
und einen Imbus um die linke Kurbel festzuschrauben:
Schau dir einfach mal das Tech-Manual von Shimano an:
http://cycle.shimano-eu.com/media/cyclin...566205.pdf
da wirst alles finden was du brauchst.
Grüße CHRISP