Boxxer o6/07/08 selber tunen!

[xxFRESHxx]

ja, jetzt gibts mehr infos

to try to clear things up...this is the complete kit in the attached image. It is a rebound assembly which has a secondary compression feature built into the backside of the piston. This is normally where you'll find the replenish circuit of the damper but for this application we do generate some additional compression force to make the fork stay up in it's travel during successive deep stroke impacts.

As some of you saw in the original littermag piece, we do have a complete drop in compression unit that we use in our forks here at PUSH. This increased the cost of the kit significantly so we opted to start with the rebound assembly which proved to be such a great performance tune. If the demand and interest merited it, we can still easily manufacture the compression unit for the aftermarket as an item that you could just drop in. For now, we're really stoked on how this kit works and what it brings to an already great product.

Bottom line, we were looking at a way of offering a hi-performance product for the older generation BoXXer that wouldn't break the bank and was user friendly. We feel that we accomplished that goal.

quasi nur ein neuer zugstufenkolben mit einer zusätzlichn druckstufe auf der rückseite. wenn das vernünftig funktioniert keine schlechte sache um die kosten niedrig zu halten und dass sie das als DIY kit anbieten find ich super.

mal sehen was das über tftuned kosten wird. aber ich weiß nicht, ob ich noch sie viel in meine alte gabel investieren möchte.