Specialized SX Trail 2012

[Euphorik]

Hi guys!

I'm selling my 2012 Specialized SX Trail bike, M size. I was ridding it 5 times , because I was not able to ride more because of my job.
Specs are original, I only put on it new front and rear disc rotors 203mm and High Roller dual ply 60 on the rear wheel.
I'm selling this bike because I'm switching to AM riding. Bike can be seen or tested in Maribor (also in Bikepark). We can also make an agreement about the transport of the bike.

Price 2000€,
mail: alen.rauh@gmail.com

[TABLE="width: 720"]
[TR]
[TD]FRAME[/TD]
[TD]M5 manipulated alloy, ORE TT/DT, tapered and forged HT, ISCG mount, 142mm dropouts, full cartridge bearing pivots and shock yoke, replaceable derailleur hanger, derailleur guard, 180mm travel[/TD]
[/TR]
[TR]
[TD]REAR SHOCK[/TD]
[TD]Custom Fox Van RC, coil over w/piggy back, compression and rebound adj., 8.5x2.125", S: 450, M: 500, L: 550,[/TD]
[/TR]
[TR]
[TD]FORK[/TD]
[TD]Fox 36 Van R, coil spring, tapered alloy steerer, preload and reb adj., 20mm thru-axle, 180mm[/TD]
[/TR]
[TR]
[TD]HEADSET[/TD]
[TD]1-1/8" cartridge alloy upper and 1-1/2" lower, cartridge bearings[/TD]
[/TR]
[TR]
[TD]STEM[/TD]
[TD]Specialized DH, forged, 35mm length, 4-bolt, 31.8mm[/TD]
[/TR]
[TR]
[TD]HANDLEBARS[/TD]
[TD]Specialized Demo low-rise bar, 7050 alloy, 750mm wide, 8º backsweep, 6º upsweep, 31.8mm[/TD]
[/TR]
[TR]
[TD]GRIPS[/TD]
[TD]Specialized lock-on, S/M: Grappler, Others: Grappler XL[/TD]
[/TR]
[TR]
[TD]FRONT BRAKE[/TD]
[TD]Custom Avid Elixir 7, hydraulic disc, metallic pad, HS-1 rotor, 200mm rotor[/TD]
[/TR]
[TR]
[TD]REAR BRAKE[/TD]
[TD]Custom Avid Elixir 7, hydraulic disc, metallic pad, HS-1 rotor, 180mm rotor[/TD]
[/TR]
[TR]
[TD]BRAKE LEVERS[/TD]
[TD]Avid Elixir 7 hydraulic, w/MatchMaker clamp[/TD]
[/TR]
[TR]
[TD]FRONT DERAILLEUR[/TD]
[TD]Shimano FD-M660 SLX, E-type for DMD, top swing, bottom pull[/TD]
[/TR]
[TR]
[TD]REAR DERAILLEUR[/TD]
[TD]SRAM X0, 10-speed, mid carbon cage[/TD]
[/TR]
[TR]
[TD]SHIFT LEVERS[/TD]
[TD]SRAM X7, 10-speed, aluminium trigger, w/MatchMaker clamp[/TD]
[/TR]
[TR]
[TD]CASSETTE[/TD]
[TD]SRAM PG-1030, 10-speed, 11-36t[/TD]
[/TR]
[TR]
[TD]CHAIN[/TD]
[TD]KMC X-10, 10-speed, w/ reusable Missing Link, nickel plates[/TD]
[/TR]
[TR]
[TD]CRANKSET[/TD]
[TD]Truvativ Descendant, 7050 alloy arms, double ring, with Gamut shiftguide[/TD]
[/TR]
[TR]
[TD]CHAINRINGS[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]BOTTOM BRACKET[/TD]
[TD]SRAM GXP outboard bearing[/TD]
[/TR]
[TR]
[TD]PEDALS[/TD]
[TD]Specialized Benies low profile with removable pins[/TD]
[/TR]
[TR]
[TD]RIMS[/TD]
[TD]Roval DH[/TD]
[/TR]
[TR]
[TD]FRONT HUB[/TD]
[TD]Specialized Hi Lo disc, laser-etched logo, sealed cartridge bearing, 20mm thru-axle, 32h[/TD]
[/TR]
[TR]
[TD]REAR HUB[/TD]
[TD]Specialized Hi Lo 142 disc, laser-etched logo, double-sealed cartridge bearing, 12mm thru-axle, 32h[/TD]
[/TR]
[TR]
[TD]SPOKES[/TD]
[TD]DT Swiss Industry stainless 2.0, (14g)[/TD]
[/TR]
[TR]
[TD]FRONT TYRE[/TD]
[TD]Specialized Butcher SX, 60 TPI, aramid bead, soft dual-compound, 26x2.3"[/TD]
[/TR]
[TR]
[TD]REAR TYRE[/TD]
[TD]Specialized Butcher SX, 60 TPI, aramid bead, soft dual-compound, 26x2.3"[/TD]
[/TR]
[TR]
[TD]INNER TUBES[/TD]
[TD]Presta valve 26x2.3[/TD]
[/TR]
[TR]
[TD]SADDLE[/TD]
[TD]Specialized DH, 8mm hollow Cr-Mo rails[/TD]
[/TR]
[TR]
[TD]SEATPOST[/TD]
[TD]2014 butted alloy, single bolt setback, 30.9mm, S/M: 350mm, others: 400mm[/TD]
[/TR]
[TR]
[TD]SEAT BINDER[/TD]
[TD]34.9mm clamp ID, 7050 hard anodized alloy collar w/ QR, black[/TD]
[/TR]
[/TABLE]